Epson Stylus NX330 Scanner Driver, Download, Software For Windows – Lift the flatbed scanner shows the system area in the printer tray, position the ink is conserved. Lastly, the back of the printer includes paper input responses which can suit 100 sheets of paper at the same time. As for printers go, it’s a fairly typical style. I favor automated file feeder with the printer (ADF) yet is intended to be concise to ensure that the printer can understand that these printers do not have it. Furthermore, this printer is created quite possibly. The very first time you activate the printer, require one or two minutes to boot up. As soon as finished, you will undoubtedly choose your language utilizing the control panel. Next off, you will lift the flatbed ink cartridges and place in each tray. Lastly, you are going to link the printer to Your Wi-Fi network using Wi-Fi Arrangement Wizard in the control board. There are added setups and also choices that are available with the control panel, but for the average individual, that’s the degree of its structures. The first point you will do after the settings is to download Epson application.
With this application, you can access numerous features that serve. Image feature lets you pick pictures that are stored on your tool as well as print it straight from there. Online storage space choices enable you to access cloud storage space sites provided as well as copy directly from them. The scanning feature enables you to put a record on the flatbed and also scan directly to your gadget. From there, you can conserve the image to your device, share photos, or print the copy. Paper access feature allows you to make use of the tool as an Epson Stylus NX330 scanner. After “scanned” you can crop the photo and also adjust the message before you print it. I must keep in mind, while the screenshots may look fuzzy in the screenshots, this is not the result of the application. It’s just difficult to hold my phone with the steady when taking the screenshots. You can additionally tailor the settings utilizing the duplicate of the application; Although, I’m not sure why you intend to do that because you have to be beside the printer to place the record in the scanner.
Epson Stylus NX330 You can additionally choose the image as well as turn it right into a coloring book page. I found these functions ideal with pictures that do not have a lot of detail. This is a genuinely trendy function to our typical youngsters. The stationary choice allows you to produce various kinds of candy-striped paper, once a week or month-to-month schedule, and compose a document using any photo on your device as a background. One of the extra exciting functions of the Creative Print applications is the capacity to print directly from Facebook. Any photos you have published to Facebook is available for printing. You can post pictures with different frameworks or no frames in any way; you can print any status that comes with the images, and also you can write a QR code that connects directly to the picture. This application additionally shows the CD/DVD label manufacturer and developer of stationery, but the attributes that are not suitable for this printer. Lastly, you will undoubtedly see a lot of screenshots; there are small teeth in the top right corner. You are pressing the equipment that will bring you to a display on top where you can pick from numerous printing choices.
Compatibility & System Requirements
Windows XP 32bit / Windows XP 64bit / Windows Vista 32bit / Windows Vista 64bit / Windows 7 32bit / Windows 7 64bit / Windows 8 32bit / Windows 8 64bit / Windows 8.1 /Linux / Mac OS
How To Setup Epson Stylus NX330 For Scanner
- For the beginning, you need to download the setup file for installing the driver of this printer.
- After you download the file, you need to find the location where you download the file and run the setup file that you have downloaded before.
- When the installation wizard pops up, you need to follow all of the instructions and provide the information that is asked when the installation wizard prompts.
- After you provide all of the necessary information, the installation process of the Epson Stylus NX330 will be started immediately.
- After some minutes, the installation process will be finished, and you will get the notification from the installation wizard.
- You need to close the wizard after that and restart your computer before you start using the printer. For your information, restarting your computer is important enough to make sure that you have installed the driver of the printer correctly.
How To Setup Epson Stylus NX330 For Firmware
- For the beginning, you will need the setup file for this printer. You can download the file that you need from the official website of Epson.
- After you downloaded the setup file, you need to run the record as the administrator. This one is important because you will not want to deal with any problems if you are not running the setup file as the administrator. Therefore, make sure you do not forget that.
- After you run the setup file, you need to follow all of the instructions on the installation wizard that will pop up later on. This is the main point of installing Epson Stylus NX330.
- After the wizard is completed, you will notice that the installation process is starting.
- After waiting for some minutes, the installation will be finished, and you can use the printer immediately.
How To Setup Epson Stylus NX330 For Wireless
- For a start, you need the setup file. You can download the setup file for this printer from many different sources, but make sure you are downloading the correct setup file that you need.
- After you have downloaded the setup file, you need to search for the location where you downloaded the setup file before.
- After you find the setup file, you need to run the setup file as the administrator. This one is rather important to prevent the problems that might occur later on during the installation of the driver.
- After you do that, the new wizard will pop up. You need to follow the wizard to install the Epson Stylus NX330 to your computer.
- After you finish everything on the wizard, the installation will start automatically, and you need to wait for it to end. After that, you can use the printer for printing anything that you want.
How To Setup Epson Stylus NX330 Manual Installations
- The first thing that you need to do is downloading the setup file that you will need to install the driver of this printer. You can only find the file that you are looking for on the official website of Epson. Or else, you can also search for the necessary file from the internet. That is because some sites will provide you with the file that you are looking for.
- The second thing that you need to do is running the file that you have downloaded earlier. Before you run the record, it is recommended for you to scan the data for the virus, especially if you download the file from some other websites other than the official website of Epson.
- After you run the file, the installation wizard will pop up, and you are ready to do the Epson Stylus NX330 manual install when the installation wizard asks you to input some information such as the location that you want to install the driver and the components that you want to install.
- After all of those things are done, the installation process will be started. You need to wait for some minutes for the installation process to be finished. When the installation process is completed, you will be notified.
How To Setup Epson Stylus NX330 For Windows
- The first thing that you need to do is turning on the printer. Since this printer is automatically switching on the Bluetooth itself, you do not need to do it on your own. Just let the printer does its job.
- After you turn on the printer, you need to connect the Bluetooth of your phone with the printer. You can do this by going to the connection setting on your phone setting. From there, you will find the option to pair your phone to another device. Choose that option.
- From there, you will be able to find the printer name on the possible list after you scan for the available devices. Choose the printer to continue the Epson Stylus NX330 Bluetooth
- Once everything is done, you need to pick the document of the photo that you want to a pint. Pick the option to send the text or picture that you want to print to using the Bluetooth connection earlier. Make sure you send it to the Epson Stylus NX330 printer, or the printing process will not start.
- Once the process is done, the printer will start printing automatically.
How To Setup Epson Stylus NX330 For CD/DVD
- For a start, you need the setup file for this printer. If you do not have the setup file, you can download the file from many online websites. Make sure the website is trusted.
- The next thing that you need to do is running the setup file, and after that, the installation wizard will pop up.
- On the installation wizard, you will be asked some details about the installation of this printer’s driver. Make sure you provide the necessary information.
- After you do that, the installation process will be started automatically, and you need to wait for some minutes before the installation of Epson Stylus NX330 is finished.
- When the installation is finished, you can use the printer immediately. For your consideration, it will be better if you restart your computer first because you need to make sure that the driver is installed correctly.
Epson Stylus NX330 Driver Downloads
|Scanner Driver and EPSON Scan Utility v126.96.36.199|
|Drivers and Utilities Combo Package|
|Printer Driver v6.92|
|Epson Software Updater v4.4.11|
|Epson Event Manager v3.11.08|
|Epson Easy Photo Print v2.41|
|Recovery Mode Firmware version SW02CA|